CALL INFORMATION SYSTEM (CIS)
SYSTEM OUTLINE
– 97 –
A2097-10
CALL INFORMATION SYSTEM (CIS)
SYSTEM OUTLINE
The D
term
TIMS (Time Information Management System) is a unique Call Information System
(CIS) which allows the system owner to obtain the trunk outgoing call information on a printer.
An ordinary serial printer is used as the TIMS printer, and the printer(s) are controlled by a D
term
.
System Outline of D
term
TIMS
Various kinds of outgoing call information are sent out from the MP (Main Processor) to the AP
(Application Processor). The AP stores the outgoing call information and executes such process-
ing as call charge calculation and accumulation. Also, the AP sends the call charge data request-
ed through the key operation of D
term
to the printer.
The system data for the function of the D
term
TIMS are entered via the CAT (Customer Adminis-
tration Terminal)/MAT (Maintenance Administration Terminal) and are stored into the AP.
TIMS PRINTER 0
TIMS PRINTER 1
LC TRUNK
TDSW
STATION PSTN
DLC
D
term
TIMS
TERMINAL
MP : MAIN PROCESSOR
AP00 : APPLICATION PROCESSOR
EXPMEM: EXPANSION MEMORY
MP
EXPMEM
AP00
To Next Page
Loading...
