NEC NEAX 2000 - Voice Call-Attendant; VOICE CALL-D Term

VOICE CALL-ATTENDANT
VOICE CALL-D
term
– 568 –
A2566-10
VOICE CALL-ATTENDANT
VOICE CALL-D
term
PROGRAMMING
DESCRIPTION DATA
Specify whether to provide Voice Call
when calling D
term
is set to Voice First from
a Single-Line Telephone or a D
term
without
an LCD.
Specify whether to provide Voice Call
when calling D
term
is set to Voice First from
Attendant Console.
(1)
(2)
(1)
(2)
270
0 : Not provided (Busy Tone)
1 : To provide
271
0 : Not provided (Busy Tone)
1 : To provide
Provide the system with the Single Digit
Feature Access Code on RBT Connec-
tion.
To activate the Single Digit Feature Ac-
cess Code, set CM08>050, 051, 069 and
148 to “1”.
NOTE: A single digit access code “1” is
fixedly assigned to this feature.
(1)
(2)
(1)
(2)
(1)
(2)
(1)
(2)
(1)
(2)
156
0: Available
050: *Button as Switch Hook Flash
1 : Ineffective
051: #Button as Switch Hook Flash
1 : Ineffective
069: Single Digit Dialing on BT Con-
nection
1 : Step Call
148: Same Last Digit Redialing on BT
Connection
1 : Ineffective
START
CM08
A