NEC NEAX 2000 - Outgoing Trunk Queuing; OUTGOING TRUNK QUEUING-D Term

OUTGOING TRUNK QUEUING
OUTGOING TRUNK QUEUING-D
term
– 365 –
A2356-10
OUTGOING TRUNK QUEUING
OUTGOING TRUNK QUEUING-D
term
PROGRAMMING
HARDWARE REQUIRED
D
term
and DLC card if required
DESCRIPTION DATA
Assign the Service Restriction Class A for
OG Trunk Queuing/OG Trunk Queuing-
D
term
to required stations.
•
(1)
(2)
Y=02
X-XXXXXXXX: Station No.
XX ZZ
XX: 00-15 : Service Restriction Class
A
Allow OG Trunk Queuing/OG Trunk Queu-
ing-D
term
in the Service Restriction Class
A assigned by CM12 Y=02.
•
(1)
(2)
Y=02
00-15: Service Restriction Class A as-
signed by CM12 Y=02
1 : Allow
Assign the access code for setting and re-
setting this service.
•
(1)
(2)
Y=0-3 Numbering Plan Group 0-3
X-XXXX: Access Code
• Different access code from Call Back
A000: Set
A001: Reset
• Same access code as Call Back
A004: Set
A005: Reset
Specify the OG Trunk Queuing capability
for each trunk route.
•
(1)
(2)
Y=28
00-63: Trunk Route No.
0 : Restricted
1 : Allow
Assign the Outgoing Trunk Queuing key to
the required D
term
.
•
(1)
(2)
Y=00
My Line No. + + Key No.
F0004
CM15
CM20
START
END
CM12
CM35
CM90
,