NEC NEAX 2000 - Dialed Number Identification Service (Dnis)

DIALED NUMBER IDENTIFICATION SERVICE (DNIS)
– 192 –
A2190-10
DIALED NUMBER IDENTIFICATION SERVICE (DNIS)
PROGRAMMING
DESCRIPTION DATA
Provide the system with Diversion Display. (1)
(2)
204
0: To provide
Specify the Incoming Call Identification
(ICI) key to which each LDN call or Tie
Line call from each trunk route will termi-
nate.
•
(1)
(2)
Y=15
00-63: Trunk Route No.
00-07: C.O. Incoming Call 0-7
40-47: Tie Line Incoming Call 0-7
Assign the required number of LDN keys
on ATTCON/DESKCON.
•
(1)
(2)
Y=00
ATTCON No. (E000-E007) + + Key
No.
F6000-F6007: C.O. Incoming Call 0-7
F6040-F6047: Tie Line Incoming Call
0-7
Assign the indialed number to each LDN
key or Tie Line key assigned by CM90. The
indialed number should be different from
any numbers assigned by CM10 and
CM11.
•
(1)
(2)
Y=01 For DID
0 : Effective data in CM35 Y=15
1-8: LDN key 0-7 assigned by CM90
X-XXXX: Indialed No.
•
(1)
(2)
Y=02 For Tie Line
0 : Effective data in CM35 Y=15
1-8: Tie Line key 0-7 assigned by CM90
X-XXXX: Indialed No.
Provide the system with LDN Diversion
feature.
(1)
(2)
205
0: Available
START
CM08
A
CM50
CM08
CM90
CM35
,