NEC NEAX 2000 Programming Manual

NAME DISPLAY-D
term
– 356 –
A2356-10
NAME DISPLAY-D
term
PROGRAMMING
DESCRIPTION DATA
Provide the system with the Name Display
Service.
(1)
(2)
255
1 : To provide
Specify station number and name display
when an incoming call begins ringing.
(1)
(2)
335
0 : Station No. and name display only
when incoming call terminates to
prime line.
1 : Station No. and name display
when incoming call terminates to
prime line or My Line.
Assign the access code for station user
name entry from individual station.
•
(1)
(2)
Y=0-3 Numbering Plan Group 0-3
X-XXXX: Access Code
A110
Specify the time go back to date and time
display often the call answered.
(1)
(2)
120
0 : 10 sec. later
1 : 6 sec. later
Specify the duration to display the name. (1)
(2)
121
0 : Until call finished
1 : As per CM08>120
Assign a trunk name number to each trunk
route.
•
(1)
(2)
Y=03
00-63: Trunk Route No.
00-14: Trunk Name No.
15 : Kind of trunk route assigned by
CM35 Y=00 are displayed
16-63: Trunk Name No.
CM20
CM35
START
CM08
CM08
A
INITIAL

NEC NEAX 2000 Specifications

General

Brand	NEC
Model	NEAX 2000
Category	Server
Language	English