NEC NEAX 2000 - Attendant Override

ATTENDANT OVERRIDE
– 39 –
A2032-10
ATTENDANT OVERRIDE
PROGRAMMING
DESCRIPTION DATA
Provide the system with ATTENDANT
OVERRIDE.
(1)
(2)
012
1 : Available
Specify whether the Warning Tone is sent
to the connected parties.
• Three burst tone
[Australia/Other Countries]
• One burst tone
[New Zealand Only]
(1)
(2)
046
0 : Not sent
1 : To send
Specify the interval of the Warning Tone
sent to the connected parties.
(1)
(2)
045
0 : Only once
1 : Every 4 sec.
Specify whether the Warning Tone is sent
to the outside party.
(1)
(2)
076
0 : To send
1 : Not sent
Assign Service Restriction Class A to
each station.
•
(1)
(2)
Y=02
X-XXXXXXXX: Station No.
XX ZZ
XX: 00-15 : Service Restriction Class
A
Allow Attendant Override called side in the
Service Restriction Class A assigned by
CM12 Y=02.
•
(1)
(2)
Y=09
00-15: Service Restriction Class A as-
signed by CM12 Y=02
1 : Allow
Assign the access code for Individual
Trunk Access.
•
(1)
(2)
Y=0-3 Numbering Plan Group 0-3
X-XXXX: Access Code
A081: Individual Trunk Access
START
CM08
CM12
CM15
CM20
A