D
term
– 241 –
A2234-10
D
term
PROGRAMMING
DESCRIPTION DATA
Assign the D
term
number to the associated
LEN.
NOTE 1: When DLC card is accommodat-
ed, D
term
number must be as-
signed for the all lines of the
card.
NOTE 2: When the following features are
used, do not assign 5 or more
digits station number.
• SMDR/PMS/CIS
• Front Desk Terminal (D
term
)
• OAI
(1)
(2)
000-763: LEN
FX-FXXXXXXXX: D
term
Station No.
X-XXXXXXXX: Represents My Line
No.
Assign the Class of Service for the accom-
modation of Single Line Telephone to
D
term
, if required.
•
(1)
(2)
Y=05
X-XXXXXXXX: Station No.
0: Accommodated
Assign the station numbers, trunk num-
bers or service feature access keys on
each D
term
, if required.
•
(1)
(2)
Y=00
My Line No. + + Key No.
Refer to Command Manual (CM90)
Specify the type of D
term
accommodated
in each DLC card.
NOTE 1: For 4DLC card, assign this data
to the first LEN (Level 0) of each
card. For 8DLC card, assign this
data to first (Level 0) and fifth
(Level 4) LEN of each card.
NOTE 2: The same type of D
term
s must be
accommodated in the same DLC
card.
•
(1)
(2)
Y=17
X-XXXXXXXX: My Line No.
0 : D
term
75 with 65 mode
(Soft Key is not available)
1 : D
term
70
3 : D
term
75 with 75 mode
(Soft Key is available)
CM12
CM12
START
CM10
A
CM90
,
INITIAL
To Next Page
Loading...
