NEC NEAX 2000 - Day;Night Mode Change by Station Dialling

DAY/NIGHT MODE CHANGE BY STATION DIALLING
– 173 –
A2168-10
DAY/NIGHT MODE CHANGE BY STATION DIALLING
PROGRAMMING
DESCRIPTION DATA
Provide the system with Day/Night Mode
Change by Station Dialing.
(1)
(2)
244: Change of Terminating System of
Incoming Trunk
0: Available
(1)
(2)
245: Change of Trunk Restriction Class
0: Available
Assign the data for terminating system in
Day Mode/Night Mode/Mode A/Mode B of
the trunk respectively.
•
•
•
•
(1)
(2)
Y=02 Day Mode
Y=03 Night Mode
Y=40 Mode A
Y=41 Mode B
000-255: Trunk No.
04: Direct-In Termination
Assign the station number to be terminat-
ed by DIT in Day Mode/Night Mode/Mode
A/Mode B respectively.
•
•
•
•
(1)
(2)
Y=04 Day Mode
Y=05 Night Mode
Y=42 Mode A
Y=43 Mode B
000-255: Trunk No.
X-XXXXXXXX: Station No.
When using Mode A or Mode B, assign the
terminating system Mode change.
•
(1)
(2)
Y=29
00-63: Tenant No.
0 : Two kinds of mode
(Day Mode, Night Mode)
1 : Four kinds of mode (Day Mode,
Night Mode, Mode A, Mode B)
Assign Service Restriction Class B to
each station.
•
(1)
(2)
Y=02
X-XXXXXXXX: Station No.
XX ZZ
ZZ: 00-15 : Service Restriction Class
B
CM30
CM12
START
CM08
A