WHISPER PAGE
– 585 –
A2580-10
WHISPER PAGE
PROGRAMMING
DESCRIPTION DATA
Assign the Service Restriction Class A for
required stations.
•
(1)
(2)
Y=02
X-XXXXXXXX: Station No.
XX ZZ
XX: 00-15 : Service Restriction Class
A
Specify the Service Restriction Class A for
whispering station and whispered station.
•
•
(1)
(2)
Y=111 Whispering station
Y=112 Whispered station
00-15: Service Restriction Class A
assigned by CM12 Y=02
0 : Restricted
1 : Allow
Assign the access code for Whisper Page. •
(1)
(2)
Y=0-3 Numbering Plan Group 0-3
X-XXXX: Access code
A188: Whisper Page
Provide the D
term
(whispering side) with a
Whisper Page key, if required.
•
(1)
(2)
Y=00
My Line No. + + Key No.
F0A88: Whisper Page
Specify whether the call termination to My
Line is restricted or allowed, while the sta-
tion user makes a call with a Sub Line or
trunk line on the D
term
.
(1)
(2)
268
0 : Restricted
1 : Allow
Specify Busy/Idle status check method as
“Station Base” or “Extension Base”.
NOTE: When CM08>268 and
CM08>269 is set to “0”, Whisper
Page is available for the exten-
sion which is making a call with a
secondary extension or trunk
line on the D
term
.
(1)
(2)
269
0 : Station base
1 : Extension base
Specify the dial tone, which is sent to the
other party when the whispered station
answers the Whisper Page.
•
(1)
(2)
Y=2
17
0 : No Tone
1 : Hold Tone
CM15
CM20
CM90
START
CM12
CM48
CM08
,
INITIAL
END
To Next Page
Loading...
