VOICE MESSAGE SYSTEM
– 584 –
A2580-10
(2) When the desired station is busy or no answer, and when you leave a message for the
station without going on-hook (using Single Digit Feature Access Code), do the following
programming in addition to the programming of item (1).
DESCRIPTION DATA
Specify the dialing of Single Digit Feature
Access Code while calling station hears
RBT or performs Voice Call.
(1)
(2)
156
0: Available
Specify the dialing of Single Digit Feature
Access Code while calling station hears
busy tone.
(1)
(2)
208
0: Available
Assign the called side for the Voice Mes-
sage Waiting-Individual.
•
(1)
(2)
Y=100
00-15: Service Restriction Class A as-
signed by CM12 Y=02
1 : Allow
Assign the access code for the Voice Mes-
sage Waiting-Individual.
•
(1)
(2)
Y=0-3 Numbering Plan Group 0-3
X-XXXX: Access Code
A146: Message Waiting/Message Re-
minder Search
A147: Message Waiting/Message Re-
minder Retrieve
Assign the feature key for the “Voice Mes-
sage Waiting Service-Individual Set when
the called station is no answer or busy” to
the D
term
, if required.
•
(1)
(2)
Y=00
My Line No. + + Key No.
F1085
CM15
CM20
START
CM08
CM90
END
,
To Next Page
Loading...
