NEC NEAX 2000 - SPEED CALLING-ONE TOUCH-D Term

SPEED CALLING-ONE TOUCH-D
term
– 443 –
A2437-10
SPEED CALLING-ONE TOUCH-D
term
PROGRAMMING
(1) To provide D
term
with One Touch key.
DESCRIPTION DATA
Assign Service Restriction Class A to
each station.
•
(1)
(2)
Y=02
X-XXXXXXXX: Station No.
XX ZZ
XX: 00-15 : Service Restriction Class
A
Allow Speed Calling-Station in the Service
Restriction Class A assigned by CM12
Y=02.
•
(1)
(2)
Y=07
00-15: Service Restriction Class A as-
signed by CM12 Y=02
1 : Allow
Specify whether to provide Toll Restriction
for an outgoing call by Speed Calling-Sta-
tion.
(1)
(2)
035
0 : Not provided
1 : To provide
Specify whether to set “#” dialing as
paused data (1.5 sec.) or called number to
C.O line when the D
term
dials “#” in the set-
ting of the Speed Calling-Station feature.
(1)
(2)
168
0 : Paused data (1.5 sec.)
1 : Dialed digit
Specify whether to set “*” dialing as pro-
grammable pause by CM41 Y=0>38 or di-
aled digit when the D
term
dials “*” in the
setting of the Speed Calling-Station fea-
ture.
(1)
(2)
171
0 : Programmable pause by CM41
Y=0>38
1 : Dialed digit
Assign the pause for Speed Calling-Sta-
tion.
•
(1)
(2)
Y=0
38
00-07: 1.5 sec.-12 sec.
(1.5 sec. increments)
If no data is set, the default setting is 1.5
sec.
CM15
CM08
START
CM12
A
CM41