NEC NEAX 2000 - Priority Call

PRIORITY CALL
– 388 –
A2382-10
PRIORITY CALL
PROGRAMMING
DESCRIPTION DATA
Assign the Service Restriction Class A for
Priority Call to the required stations.
•
(1)
(2)
Y=02
X-XXXXXXXX: Station No.
XX ZZ
XX: 00-15 : Service Restriction Class
A
Allow Priority Call in the Service Restric-
tion Class A assigned by CM12 Y=02.
•
•
(1)
(2)
Y=17 Priority Call 0
Y=18 Priority Call 1
00-15: Service Restriction Class A as-
signed by CM12 Y=02
1 : Allow
Assign the access code for Priority Calls 0
and 1 respectively.
•
(1)
(2)
Y=0-3 Numbering Plan Group 0-3
X-XXXX: Access Code
A088: Priority Call 0
A089: Priority Call 1
Specify the destination for Priority Calls 0
and 1.
(1)
(2)
250: For Priority Call 0
0 : Same Station as Off Hook Alarm
1 : Attendant Console
(1)
(2)
251: For Priority Call 1
0 : Same station as Off Hook Alarm
1 : Attendant Console
When CM08>250, 251 is set to “1”, assign
the Priority Calls 0 and 1 to any Priority
Call Keys on the ATTCON/DESKCON.
(1)
(2)
ATTCON No. (E000-E007) + + Key
No.
F6054: Priority Call 0
F6055: Priority Call 1
When CM08>250, 251 is set to “0”, assign
the destination of Priority Calls 0 and 1 to
desired station.
•
(1)
(2)
Y=12
00-63: Tenant No.
X-XXXXXXXX: Station No.
START
END
CM12
CM08
CM51
CM15
CM20
CM90
,