NEC NEAX 2000 - FLEXIBLE RINGING ASSIGNMENT-D Term

FLEXIBLE RINGING ASSIGNMENT-D
term
– 260 –
A2260-10
FLEXIBLE RINGING ASSIGNMENT-D
term
PROGRAMMING
DESCRIPTION DATA
Specify the method of tone ringer selec-
tion.
(1)
(2)
390
1 : As per CM15 Y=83, 84, CM35
Y=34
Assign the Service Restriction Class C for
the ring tone for D
term
s on internal calls to
required stations.
•
(1)
(2)
Y=07
X-XXXXXXXX: Station No.
00-15 : Service Restriction Class C
Specify the ring tone for D
term
s on internal
calls.
•
(1)
(2)
Y=83, 84
00-15: Service Restriction Class C
assigned by CM12 Y=07
0 : See left table.
1 : See left table.
Specify the ring tone for incoming calls to
each trunk route.
•
(1)
(2)
Y=34
00-63: Trunk Route No.
0 : 1024 +1285 (Hz)
× 16 (Hz)
1 : 480 + 606 (Hz) × 8 (Hz)
2 : 600 + 700 (Hz)
3 : 480 + 606 (Hz) × 16 (Hz)
Disable the ringing on each line key of a
D
term
, if required.
•
(1)
(2)
Y=01 Day Mode
My Line No. + + Key No.
0: Disable
Refer to “DELAYED RINGING-D
term
”
page 177 , when providing Delayed
Ringing to each line key.
START
CM08
CM12
CM35
CM90
CM15
A
INITIAL
Y
RING TONE
83 84
0 0 600 + 700 [Hz]
1 0 1024 + 1285 [Hz] × 16 [Hz]
0 1 480 + 606 [Hz] × 8 [Hz]
1 1 480 + 606 [Hz] × 16 [Hz]
,