NEC NEAX 2000 - Power Failure Transfer

POWER FAILURE TRANSFER
– 386 –
A2382-10
POWER FAILURE TRANSFER
PROGRAMMING
To use the AUC card:
To use the PFT card:
No programming is required.
HARDWARE REQUIRED
AUC card and COT card, or PFT card
DESCRIPTION DATA
Assign the AUC card to the required LEN. (1)
(2)
000-763: LEN
X-XXXXXXXX: Station No.
Assign the COT card to the required LEN. (1)
(2)
000-763: LEN
D000-D255: Trunk No.
START
END
CM10