SINGLE DIGIT STATION CALLING-W/O TIMING
– 431 –
A2425-10
SINGLE DIGIT STATION CALLING-W/O TIMING
PROGRAMMING
DESCRIPTION DATA
Assign station number to each LEN. (1)
(2)
000-763: LEN
X: Station No.
Assign the station data to each station.
NOTE: For providing the DTMF stations,
DTMF Receivers are required,
(See PUSHBUTTON
CALLING.
page 392
)
•
(1)
(2)
Y=00 Telephone types
X-XXXXXXXX: Station No.
1 : DP
2 : DTMF
3 : DTMF/DP
•
(1)
(2)
Y=04 Tenant
X-XXXXXXXX: Station No.
00-63: Tenant No.
•
(1)
(2)
Y=03 Kind of Telephone
X-XXXXXXXX: Station No.
15 : Ordinary station
Assign the Station Numbering Plan data to
the leading one digit of station number.
NOTE: The Single Digit number must be
different from the first digit of
Trunk Access Code, Service
Feature Access Code or other
station number.
•
(1)
(2)
Y=0-3 Numbering Plan Group 0-3
X: Leading 1 digit of station No.
801: 1 digit station No.
If the multiple Tenant is provided, specify
the station to station call capability be-
tween Tenants.
•
(1)
(2)
Y=1
XX ZZ
XX: Tenant No. of Calling Station
ZZ: Tenant No. of Called Station
0 : Restricted
1 : Allowed
CM12
CM20
CM63
START
END
CM10