NEC NEAX 2000 - Account Code; Account Code-Attendant; ACCOUNT CODE-D Term

ACCOUNT CODE
ACCOUNT CODE-ATTENDANT
ACCOUNT CODE-D
term
– 9 –
A2008-10
ACCOUNT CODE
ACCOUNT CODE-ATTENDANT
ACCOUNT CODE-D
term
PROGRAMMING
DESCRIPTION DATA
Specify whether Service Set Tone should
be sent after dialing the access code for
Account Code entry.
(1)
(2)
362
0 : No Tone
1 : Service Set Tone
Assign the Service Restriction Class A for
Account Code entry to the required sta-
tions.
•
(1)
(2)
Y=02
X-XXXXXXXX: My Line No.
XX ZZ
XX: 00-15 : Service Restriction Class
A
Allow Account Code in the Service Re-
striction Class A assigned by CM12 Y=02.
•
(1)
(2)
Y=30
00-15: Service Restriction Class A
assigned by CM12 Y=02
1 : Allow
Specify the maximum number of digits for
Account Codes.
NOTE: If the SMDR message format
(2400 IMS Format) is assigned,
the maximum number of digits is
10.
(1)
(2)
10
01-16: Max. number of digits
If no data is entered, the default is 10.
Assign an access code for Account Code
entry.
•
(1)
(2)
Y=0-3 Numbering Plan Group 0-3
X-XXXX: Access Code
A085
Assign an Account Code feature access
key to a D
term
, if required.
NOTE: If the Account Code is entered by
Speed Calling-One Touch key,
CM90 function key assignment is
not required.
•
(1)
(2)
Y=0
My Line No. + + Key No.
F0085
CM12
CM42
START
CM08
CM15
CM20
CM90
,
END