GUEST NAME DISPLAY THROUGH PMS
– 662 –
A2653-10
GUEST NAME DISPLAY THROUGH PMS
PROGRAMMING
For programming of the PMS, refer to “PMS INTERFACE”.
page 682
DESCRIPTION DATA
Provided the system with Name Display
service.
(1)
(2)
255
1 : To provide
Specify the time to go back to Data and
Time display after the call answered.
(1)
(2)
120
0 : 10 sec. later
1 : 6 sec. later
Specify the duration to display the name. (1)
(2)
121
0 : Until call finished
1 : As per CM08>120
Assign a trunk name number to each trunk
route.
•
(1)
(2)
Y=03
00-63: Trunk Route No.
00-14: Trunk Name No.
15 : Kind of trunk route assigned by
CM35 Y=00 are displayed
16-63: Trunk Name No.
Enter the desired station user name to
each station number by CM77 Y=0 or Y=1.
•
(1)
(2)
Y=0 By Character Code
X-XXXX: Station No.
20-7F: Character Code
Max. 32 digits
See APPENDIX B: CHARACTER
CODE TABLE.
•
(1)
(2)
Y=1 By Character
X-XXXX: Station No.
A-Z, 0-9: Character
Max. 16 characters
CM77
START
CM08
CM35
A
To Next Page
Loading...
