DIRECT INWARD DIALLING (DID)
– 222 –
A2222-10
DIRECT INWARD DIALLING (DID)
PROGRAMMING
DESCRIPTION DATA
Assign the ring cadence on a Direct In-
ward Dialing.
(1)
(2)
180
0 : As per CM08>392 Pattern 2
1 : As per CM35 Y=33
Assign the trunk number to required LEN. (1)
(2)
000-763: LEN
D000-D255: Trunk No.
Assign the data for DID to the trunk num-
bers assigned by CM10.
•
(1)
(2)
•
(1)
(2)
•
•
•
•
(1)
(2)
Y=00 Trunk Route Allocation
000-255: Trunk No.
00-63: Trunk Route No.
Y=01 Tenant Allocation
000-255: Trunk No.
00-63: Tenant No.
01 : Tenant No.
Y=02
Terminating System in Day Mode
Y=03
Terminating System in Night Mode
Y=40 Terminating System in Mode A
Y=41 Terminating System in Mode B
000-255: Trunk No.
31 : DID, Tie line and any call which is
not handled by the PBX
Assign the data for DID to the trunk routes
assigned by CM30 Y=00.
•
(1)
(2)
Y=00 Kind of Trunk
00-63: Trunk Route No.
00: DID
•
(1)
(2)
Y=02 OG/IC
00-63: Trunk Route No.
1: Incoming trunk
CM10
CM35
START
CM08
A
CM30
To Next Page
Loading...
Need help?
General