NEC NEAX 2000 - Agent Busy Out-Ucd

AGENT BUSY OUT-UCD
– 17 –
A2008-10
AGENT BUSY OUT-UCD
PROGRAMMING
To display Busy Out from UCD Group on the DSS Console:
HARDWARE REQUIRED
DSS Console
D
term
and DLC card if required
DESCRIPTION DATA
Assign the access code for UCD station
Busy-Out Set and Reset.
•
(1)
(2)
Y=0-3 Numbering Plan Group 0-3
X-XXXX: Access Code
A044: Busy-Out Set
A045: Busy-Out Reset
Assign the BUSY OUT key to required
UCD D
term
stations, if provided.
•
(1)
(2)
Y=00
My Line No. + + Key No.
F0044: UCD Busy-Out
Specify the connection when a UCD sta-
tion dials UCD Busy-Out code after hold-
ing the call from C.O. or Tie Line.
(1)
(2)
214: For Tie Line Call
215: For C.O. Line Call
0 : Service Set Tone and return to the
call by Switch Hook Flash
1 : The call is disconnected
Enable the Agent Busy-Out set and reset
from the Sub Line.
(1)
(2)
442
0 : Available
1 : Not available
DESCRIPTION DATA
Provide the Busy Out display on the DSS
Console.
(1)
(2)
265
0: To provide
Assign the function key for busy out dis-
play on each DSS Console.
(1)
(2)
DSS Console No. (01-31) + + DSS
Key No. (57-59)
F1055: UCD busy out display
CM90
CM08
START
CM20
END
,
START
CM08
END
CM97
,