NEC NEAX 2000 Programming Manual

ATTENDANT TERMINAL-D
term
– 42 –
A2042-10
ATTENDANT TERMINAL-D
term
PROGRAMMING
DESCRIPTION DATA
Assign the My Line number to the required
LEN.
(1)
(2)
000-763: LEN
FX-FXXXXXXXX: My Line No.
Assign the Service Restriction Class B for
the Attendant Terminal to the required
D
term
.
NOTE: The Service Restriction Class
number for Attendant Terminal
should be different from an ordi-
nary station.
•
(1)
(2)
Y=02
X-XXXXXXXX: My Line No.
XX ZZ
ZZ: 00-15 : Service Restriction Class
B
Allow the Attendant Terminal in the Ser-
vice Restriction Class B assigned by
CM12 Y=02.
•
(1)
(2)
Y=71
00-15: Service Restriction Class B as-
signed by CM12 Y=02
0: Attendant Terminal
Assign the required number of Loop, ICI
(Incoming Call Identification) and OPR
(Operator Call) lines to the Virtual LEN.
(1)
(2)
000-255: Virtual LEN
AA X Y: Loop Line No.
X: 0-7: Attendant Terminal No.
Y: 1-5: Loop No.
AB00-AB99: ICI/OPR Line No.
NOTE: Usually, ICI/OPR numbers are assigned on a per Attendant Terminal Group basis.
CM12
CM15
CM11
START
CM10
A

NEC NEAX 2000 Specifications

General

Brand	NEC
Model	NEAX 2000
Category	Server
Language	English