NEC NEAX 2000 - Do Not Disturb-System

DO NOT DISTURB-SYSTEM
– 660 –
A2653-10
DO NOT DISTURB-SYSTEM
PROGRAMMING
To provide Do Not Disturb-System from a Front Desk Terminal or Hotel Console:
DESCRIPTION DATA
Assign Do Not Disturb-System to required
stations.
Do Not Disturb is set to the stations as-
signed by this command simultaneously
from the Front Desk Terminal or Attendant
Console.
•
(1)
(2)
Y=00
X-XXXX: Station No.
0: To provide
Assign the destination of a call transferred
when the called station is in Do Not Dis-
turb mode.
•
(1)
(2)
Y=10
00-63: Tenant No.
X-XXXX: Station No.
or
E000: Attendant Console
Assign the Call Forwarding-Intercept
(ICPT) key, if the ATTCON/DESKCON is
assigned as destination by CM51 Y=10.
•
(1)
(2)
Y=00
ATTCON No. (E000-E007) + + Key
No.
F6065: Call Forwarding-Intercept
Assign the DND function keys to the Front
Desk Terminal, if provided.
•
(1)
(2)
Y=00
My Line No. + + Key No.
F1064: Do Not Disturb
F1072: Group
F1074: Set
F1075: Reset
F1077: Release
F1080: Do Not Disturb Override
Assign the DND function keys to the Hotel
Console, if provided.
•
(1)
(2)
Y=00
ATTCON No. (E000-E007) + + Key
No.
F6102: Do Not Disturb
F6103: Do Not Disturb Override
F6104: Reset
CM90
CM51
START
CM13
A
,
,
,