TRUNK LINE APPEARANCE-D
term
– 537 –
A2536-10
TRUNK LINE APPEARANCE-D
term
PROGRAMMING
DESCRIPTION DATA
Assign the terminating system for required
C.O. trunks to Trunk Line Appearance.
•
•
•
•
(1)
(2)
Y=02 Day Mode
Y=03 Night Mode
Y=40 Mode A
Y=41 Mode B
000-255: Trunk No.
02: Trunk Line Appearance
Provide the Trunk with Trunk Line Appear-
ance feature.
•
(1)
(2)
Y=18
000-255: Trunk No.
0: To provide
Assign the Trunk Line Appearance key to
each D
term
.
•
(1)
(2)
Y=00
My Line No. + + Key No.
D000-D255: Trunk No.
Assign a Hold key for holding the Trunk
Line Appearance call, to each D
term
, as re-
quired.
By this assignment, the held Trunk Line
Appearance call can be Transferred by
voice call, and can be answered by the
Trunk Line Appearance key on the desti-
nation station.
•
(1)
(2)
Y=00
My Line No. + + Key No.
F0058
Specify whether a Dial Tone is sent when
the call is held by the Hold key for Trunk
Line Appearance (CM90 Y=00>F0058).
(1)
(2)
365
0 : Sent
1 : Not sent
Specify whether Hold Transfer for a trunk
line placed in Consultation Hold is avail-
able or not.
(1)
(2)
161
0 : Available (Hold Transfer)
1 : Not available (Consultation Hold)
CM90
CM08
START
END
CM30
,
,
To Next Page
Loading...
