NEC NEAX 2000 - Features for Other Countries Only; Caller ID Class

FEATURES FOR OTHER COUNTRIES ONLY
CALLER ID CLASS
– 594 –
A2594-10
CALLER ID CLASS
PROGRAMMING
(1) Trunk Assignment for CALLER ID CLASS
DESCRIPTION DATA
Specify the terminating system in Day
Mode/Night Mode/Mode A and Mode B for
incoming calls.
•
•
•
•
(1)
(2)
Y=02 Day Mode
Y=03 Night Mode
Y=40 Mode A
Y=41 Mode B
000-255: Trunk No.
02 : Trunk Line Appearance
03 : Trunk Line Appearance + TAS
04 : Direct-In Termination
08 : Dial-in
09 : Automated Attendant
10 : Attendant Console + TAS
11 : Attendant Console + Trunk Line
Appearance
12 : Attendant Console + Trunk Line
Appearance + TAS
14 : Termination to Attendant Console
16 : Remote Access to System
18 : ISDN Indial
31 : DID, Tie Line and any call which
is not handled by the PBX
Assign the type of the trunk route. •
(1)
(2)
Y=00 Kind of trunk route
00-63: Trunk Route No.
00: DDD (C.O./DID)
Provide the trunk route with MF Signaling. •
(1)
(2)
Y=37 MF Signaling
00-63: Trunk Route No.
0: Available
CM35
START
CM30
A