NEC NEAX 2000 - Tie Line Access

TIE LINE ACCESS
– 507 –
A2499-10
TIE LINE ACCESS
PROGRAMMING
DESCRIPTION DATA
Assign a trunk number for the LDT/ODT
card to the required LEN.
NOTE: The trunk number of LDT/ODT
card must be assigned to the first
LEN (Level 0) and the second
LEN (Level 1) of each LT slot.
(1)
(2)
000-763: LEN
D000-D255: Trunk No.
Assign a Trunk Route access code to each
Tie Line Trunk route.
•
(1)
(2)
Y=0-3 Numbering Plan Group 0-3
X-XXXX: Access Code
100-163: Trunk Route No. 00-63
Assign a Trunk Route and Tenant number
to each Trunk.
•
(1)
(2)
Y=00
000-255: Trunk No.
00-63: Trunk Route No.
•
(1)
(2)
Y=01
000-255: Trunk No.
00-63: Trunk Route No.
Assign Trunk Route data to the Trunk
Route number.
•
(1)
(2)
Y=00
00-63: Trunk Route No.
04: Tie Line
•
(1)
(2)
Y=01
00-63: Trunk Route No.
< Incoming > < Outgoing >
2 : DP DP
4 : DTMF DTMF
7 : DTMF/DP DTMF
•
(1)
(2)
Y=02
00-63: Trunk Route No.
1 : Incoming Trunk
2 : Outgoing Trunk
3 : Bothway Trunk
CM30
CM20
START
CM10
A
CM35