NEC NEAX 2000 Programming Manual

AUTOMATED ATTENDANT
– 56 –
A2056-10
AUTOMATED ATTENDANT
PROGRAMMING
DESCRIPTION DATA
Assign the data for Automated Attendant
to the required trunks.
•
•
•
•
(1)
(2)
Y=02
Terminating System in Day Mode
Y=03
Terminating System in Night Mode
Y=40 Terminating System in Mode A
Y=41 Terminating System in Mode B
000-255: Trunk No.
09: Automated Attendant
NOTE: When providing a Night Mes-
sage for Automated Attendant,
the 2nd Answering Message
which is assigned by CM49
Y=00>2nd data 02XX is used for
the Night Message. In that case,
the 2nd data 08 of CM30 Y=30,
31 cannot be specified for han-
dling of busy/not available Auto-
mated Attendant destination.
•
•
(1)
(2)
•
•
(1)
(2)
Y=30 Handling of busy/not available
Automated Attendant destination
in Day Mode
Y=31 Handling of busy/not available
Automated Attendant destination
in Night Mode
000-255: Trunk No.
00 : C.O. line release
01 : Forwarded to TAS
03 : Forwarded to Attendant Console
04 : Forwarded to DIT Station
05 : Music and DT connection for
Redial
06 : DT connection for redial
08 : 2nd Answering Message and DT
connection for redial
NOTE
15 : C.O. line release
Y=32 Handling of timed-out Automated
Attendant call in Day Mode
Y=37 Handling of timed-out Automated
Attendant call in Night Mode
000-255: Trunk No.
00 : C.O. line release
01 : Forwarded to TAS
03 : Forwarded to Attendant Console
04 : Forwarded to DIT station
06 : DT connection for redial
15 : C.O. line release
START
CM30
A

NEC NEAX 2000 Specifications

General

Brand	NEC
Model	NEAX 2000
Category	Server
Language	English