VOICE GUIDE
– 570 –
A2566-10
VOICE GUIDE
PROGRAMMING
To provide the message which is sent when a station goes off hook while Message Waiting/Call
Forwarding-All Calls/Do Not Disturb service is set to the station:
DESCRIPTION DATA
Specify the multiple connections of the
Digital Announcement Trunk (DAT card)
on Announcement Service.
(1)
(2)
124
0 : Available
1 : Not available (Single connection)
Assign a Digital Announcement Trunk card
number to the required LEN.
NOTE: The Digital Announcement Trunk
card number must be assigned
to the first LEN (Level 0), the
third LEN (Level 2), the fifth LEN
(Level 4) and the seventh LEN
(Level 6) of each LT slot.
(1)
(2)
000-763: LEN
EB002-EB127: Digital Announcement
Trunk Card No.
For PIM0/1: EB002-EB031
For PIM2/3: EB032-EB063
For PIM4/5: EB064-EB095
For PIM6/7: EB096-EB127
NOTE: EB000 and EB001 are dedi-
cated to built-in Digital An-
nouncement Trunk of the MP
card.
Assign the Service Restriction Class A for
Announcement Service to the required
stations.
•
(1)
(2)
Y=02
X-XXXXXXXX: Station No.
XX ZZ
XX: 00-15 : Service Restriction Class
A
Allow Announcement Service in the Ser-
vice Restriction Class A assigned by
CM12 Y=02.
•
•
•
•
•
•
(1)
(2)
Y=34 Group 0
Y=35 Group 1
Y=36 Group 2
Y=37 Group 3
Y=38 Group 4
Y=39 Recording for Announcement
Service (Group 0-4)
00-15: Service Restriction Class A as-
signed by CM12 Y=02
1 : Allow
START
CM08
A
CM10
CM15
CM12
To Next Page
Loading...
Need help?
General