EasyManua.ls Logo

NEC NEAX 2000 - Page 591

NEC NEAX 2000
1200 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
VOICE GUIDE
– 571 –
A2566-10
NOTE 1: While both Message Waiting and Call Forwarding-All Calls/Do Not Disturb Service are
set to the station, the message assigned by CM49 Y=13>00 is sent.
NOTE 2: While Message Reminder (from STA/ATT) Service is set to the station, the message
assigned by CM49 Y=13>00 is sent.
NOTE 3: While Split Call Forwarding-All Calls Service is set to the station, the message as-
signed by CM49 Y=13>03 is sent.
DESCRIPTION DATA
Assign access codes for Announcement
Service.
(1)
(2)
Y=0-3 Numbering Plan Group 0-3
X-XXXX: Access Code
A103: Record (Group 0-4)
A104: Replay (Group 0)
A105: Replay (Group 1)
A106: Replay (Group 2)
A107: Replay (Group 3)
A108: Replay (Group 4)
A109: Delete (Group 0-4)
Specify the dial tone, which is sent when a
station goes off hook while the service is
set for the station, as Special Dial Tone.
(1)
(2)
Y=2
12: Dial Tone on setting Message Wait-
ing
13: Dial Tone on setting Call Forward-
ing-All Calls
14: Dial Tone on setting Do Not Disturb
0: Special Dial Tone
Allow Voice Guide set by CM48 Y=2>12,
13, 14 in the Service Restriction Class A
assigned by CM12.
(1)
(2)
Y=116
00-15: Service Restriction Class A as-
signed by CM12
1 : Allow
Assign the Voice Guide function for each
Digital Announcement Trunk card.
(1)
(2)
Y=00
000-001: Built-in DAT on MP card
002-127: Digital Announcement Trunk
Card No. (EB002-EB127) as-
signed by CM10
17XX: Voice Guide
XX : 00-63: Message
Assign the Message sent when the station
goes off hook.
(1)
(2)
Y=13
00: Message sent when Message Wait-
ing is set
03: Message sent when Call Forward-
ing-All Calls/Do Not Disturb is set
00-63: Message No.
CM20
CM15
CM49
A
CM48
INITIAL
END

Table of Contents

Other manuals for NEC NEAX 2000

Related product manuals