NEC NEAX 2000 - Room Cut-Off

ROOM CUT OFF
– 688 –
A2679-10
ROOM CUT OFF
PROGRAMMING
To provide the Room Cut Off from a Front Desk Terminal or Hotel Console, or PMS, do the fol-
lowing programming:
DESCRIPTION DATA
Specify the type of call to be restricted by
Room Cut Off.
(1)
(2)
232
0 : C.O. outgoing calls
1 : All outgoing calls
Specify whether Room Cut Off record is
printed out on Hotel Printer, and the report
is sent to PMS when setting or resetting
Room Cut Off.
(1)
(2)
267
0 : Available
1 : Not available
Assign the destination of a call transferred
when the station in Room Cut Off condi-
tion dials outgoing access code.
•
(1)
(2)
Y=11
00-63: Tenant No.
X-XXXX: Station No.
or
E000: Attendant Console
Assign the Call Forwarding-Intercept
(ICPT) key, if the ATTCON/DESKCON is
assigned as destination by CM51 Y=11.
•
(1)
(2)
Y=00
ATTCON No. (E000-E007) + + Key
No.
F6065: Call Forwarding-Intercept
Assign the function keys required for
Room Cut Off on the Front Desk Terminal.
NOTE: This data assignment is not re-
quired when Room Cut Off is set
by PMS.
•
(1)
(2)
Y=00
My Line No. + + Key No.
F1065: Room Cut Off
NOTE
F1074: Set
F1076: Reset
F1077: Release
Assign the function key required for Room
Cut Off on the ATTCON/DESKCON, if pro-
vided.
•
(1)
(2)
Y=00
ATTCON No. (E000-E007) + + Key
No.
F6100: Room Cut Off
F6104: Reset
CM90
START
CM08
CM51
A
,
,
,