NEC NEAX 2000 - Message Waiting Lamp Setting-Attendant; Message Waiting Lamp Setting-Station

– 334 –
A2325-10
MESSAGE WAITING LAMP SETTING-ATTENDANT
MESSAGE WAITING LAMP SETTING-STATION
MESSAGE WAITING LAMP SETTING-ATTENDANT
MESSAGE WAITING LAMP SETTING-STATION
PROGRAMMING
DESCRIPTION DATA
Provide each station with Message Wait-
ing. (D
term
or Single Line Telephone with
MW Lamp)
•
(1)
(2)
Y=03
X-XXXXXXXX: Station No.
0: To provide
Assign the Service Restriction Class A for
Message Waiting to required stations as
shown below.
•
(1)
(2)
Y=02
X-XXXXXXXX: Station No.
XX ZZ
XX: 00-15 : Service Restriction Class
A
Allow Message Waiting in the Service Re-
striction Class A assigned by CM12 Y=02.
•
(1)
(2)
Y=24 MW lamp set/reset (setting side)
00-15: Service Restriction Class A
1 : Allow
•
(1)
(2)
Y=40 MW lamp control by station/at-
tendant
00-15: Service Restriction Class A
1 : Allow
Assign the access code for Message
Waiting Set/Reset/Retrieve.
•
(1)
(2)
Y=0-3 Numbering Plan Group 0-3
X-XXXX: Access Code
A040: MW Set
A041: MW Reset
A147: MW Retrieve
CM12
CM15
CM20
START
CM13
A
STATION
CM15
Y=24
CM15
Y=40
Station w/o MW Lamp 0 0
Station with MW Lamp 0 1
MW setting station 1 0