NEC NEAX 2000 - Page 355

– 335 –
A2325-10
MESSAGE WAITING LAMP SETTING-ATTENDANT
MESSAGE WAITING LAMP SETTING-STATION
DESCRIPTION DATA
Assign the Message Front destination of
the retrieve call from the station to which
Message Waiting is set.
By pressing MW Retrieve access code or
MW key on D
term
, the call is routed to the
destination.
•
(1)
(2)
Y=15
00-63: Tenant No. to which MW set
D
term
belongs
X-XXXXXXXX: Station No./My Line No.
E000: Attendant Console
Assign the Lamp color on D
term
when
Message Waiting is set.
(1)
(2)
144
0 : Green
1 : Red
Specify the Message Lamp Indication
Pattern on D
term
.
(1)
(2)
294
0 : Flashing (60 IPM)
1 : Steady Lighting
If Attendant Console is assigned as the
Message Front destination by CM51 Y=15,
set the data for 233 to 0.
With this setting, Message Waiting is auto-
matically reset when the attendant an-
swers.
(1)
(2)
233
0: Available
To reset Message Waiting indication while
the Message Front station or attendant
rings, set the data for 234 to 0.
(1)
(2)
234
0: Available
To reset Message Waiting indication when
the desired station answers a second call
from the Message Front station or atten-
dant, set the data for 235 to 0.
(1)
(2)
235
0: Available
Assign the Message Waiting key to re-
quired stations, if required.
•
(1)
(2)
Y=00
My Line No. + + Key No.
• For setting station
F0040: Message Waiting Set
F0041: Message Waiting Reset
• For set station w/o MW Lamp
F1005: Message Waiting Lamp
CM51
A
CM90
CM08
B
,