NEC NEAX 2000 - Call Waiting-Station

CALL WAITING-STATION
– 143 –
A2131-10
CALL WAITING-STATION
PROGRAMMING
DESCRIPTION DATA
Provide the system with the Call Waiting
feature.
(1)
(2)
146: Automatic Camp-On
0: Available
(1)
(2)
147: Manual Camp-On
(Result of Switch Hook Flash
while hearing Busy Tone)
0: Special Dial Tone allowing use of
Camp-On by Station access code
To activate the Single Digit Feature Ac-
cess Code, set the data for 050, 051, 069
and 148 to “1”.
(1)
(2)
050: * Button as Switch Hook Flash
1 : Ineffective
(1)
(2)
051: # Button as Switch Hook Flash
1 : Ineffective
(1)
(2)
069: Single Digit Dialing on BT Con-
nection
1 : Step Call
(1)
(2)
148: Same Last Digit Redialing on BT
Connection
1 : Ineffective
Provide the System with the Single Digit
Feature Access Code on BT Connection.
(1)
(2)
208
0: Available
Specify the Camp-On (Call Waiting) Tone
sent to a busy station.
(1)
(2)
367
For Australia/Other Countries:
0 : Every 4 sec.
1 : Only once
For New Zealand:
0 : Only once
1 : Every 2 min.
START
CM08
A