STATION HUNTING-CIRCULAR
– 473 –
A2463-10
STATION HUNTING-CIRCULAR
PROGRAMMING
DESCRIPTION DATA
To set up each Station Hunting group, as-
sign station numbers, one by one, in order
of the Hunting as shown below.
Example: For setting station number 200,
201, 202 into one Hunting
group.
1st Operation (1) 200
(2) 201
2nd Operation (1) 201
(2) 202
3rd Operation (1) 202
(2) 200
Specify the Hunting capability of each sta-
tion.
In case of Station Hunting-Circular, all sta-
tions should be set to “1”.
In case of Station Hunting-Switch Back,
the last station should be set to “5”, and
other stations should be set to “1”.
NOTE 1: The maximum number of sta-
tions per hunt group is 60. And
there is no limit to the number of
Circular Hunt groups within the
system.
NOTE 2: Each station can belong to only
one hunt group.
NOTE 3: The Attendant Console cannot
be member of a hunt group.
•
(1)
(2)
•
(1)
(2)
Y=0
X-XXXXXXXX: Station No. to be in-
cluded in Station Hunt-
ing Group
X-XXXXXXXX: Another Station No. to
be linked
Y=1
X-XXXXXXXX: Station No.
1: All the station of Circular system
5: Last station for Station Hunting-
Switch Back
Allow or restrict the ability to set Station
Hunting-Circular for a station with Do Not
Disturb set.
(1)
(2)
240
0 : Allow
1 : Restricted
START
END
CM18
CM08
3rd1st
2nd
200
202
201
To Next Page
Loading...
Need help?
General