NEC NEAX 2000 - Individual Trunk Access

INDIVIDUAL TRUNK ACCESS
– 281 –
A2280-10
INDIVIDUAL TRUNK ACCESS
PROGRAMMING
DESCRIPTION DATA
Assign the access code for Individual
Trunk Access.
•
(1)
(2)
Y=0-3 Numbering Plan Group 0-3
X-XXXX: Access Code
A081
Assign the Trunk Identification (ID) Code
to each trunk.
The Trunk ID Code is to be dialed after the
access code, and displayed on the Atten-
dant Console or D
term
.
•
(1)
(2)
Y=19
000-255: Trunk No. assigned by CM10
(D000-D255)
XXXX: Trunk ID Code
Set any desired number (4 digits) for
Trunk ID Code
NOTE: By loading Resident System
Program, Trunk Identification
Codes are assigned as fol-
lows.
1 XXX
XXX: 000-255: Trunk No.
Assign the Service Restriction Class B for
Individual Trunk Access to required sta-
tions.
•
(1)
(2)
Y=02
X-XXXXXXXX: Station No.
XX ZZ
ZZ: 00-15 : Service Restriction Class
B
Allow Individual Trunk Access in the Ser-
vice Restriction Class B assigned by
CM12 Y=02.
•
(1)
(2)
Y=55
00-15: Service Restriction Class B as-
signed by CM12 Y=02
1 : Allow
CM30
CM12
CM15
START
END
CM20