NEC NEAX 2000 - Split Call Forwarding-Dont Answer

SPLIT CALL FORWARDING-DON’T ANSWER
– 463 –
A2463-10
SPLIT CALL FORWARDING-DON’T ANSWER
PROGRAMMING
DESCRIPTION DATA
Assign Service Restriction Class A for Call
Forwarding-Don’t Answer to required sta-
tions.
•
(1)
(2)
Y=02
X-XXXXXXXX: Station No.
XX ZZ
XX: 00-15 : Service Restriction Class
A
Allow Call Forwarding-Don’t Answer in the
Service Restriction Class A assigned by
CM12 Y=02.
NOTE: To provide Split Call Forwarding-
Don’t Answer, set “1” (Allow) for
CM15 Y=10, Y=27, Y=12, Y=29.
•
•
(1)
(2)
Y=10 Call Forwarding-Don’t Answer
Y=27 Call Forwarding-Don’t Answer-
Outside
00-15: Service Restriction Class A as-
signed by CM12 Y=02
1 : Allow
•
•
(1)
(2)
Y=12 Call Forwarding-Busy Line/-Don’t
Answer
Y=29 Call Forwarding-Busy Line-Out-
side/-Don’t Answer-Outside
00-15: Service Restriction Class A as-
signed by CM12 Y=02
1 : Allow
Assign the access code for Call Forward-
ing-Don’t Answer, Entry and Cancellation,
respectively.
•
(1)
(2)
Y=0-3 Numbering Plan Group 0-3
X-XXXX: Access Code
A016: Call Forwarding-Don’t Answer
Entry
A017: Call Forwarding-Don’t Answer
Cancel
For setting the same access code as Call
Forwarding-Busy Line
(2) A012: Entry
A013: Cancel
CM15
START
CM12
CM20
A