SPLIT CALL FORWARDING-BUSY LINE
– 462 –
A2452-10
NOTE: The operating procedure for Split Call Forwarding-Busy Line/-Don’t Answer is as fol-
lows:
CM78 is used to assign the destination forwarded when the destination No. 0-7 is spec-
ified.
HARDWARE REQUIRED
D
term
with LCD and DLC card, if required
DESCRIPTION DATA
Select the feature available in each tenant
when an internal call and a Tie Line/C.O.
incoming call is terminated.
•
•
•
(1)
(2)
Y=23
Internal Call or ATT Assisted Call
Y=24 C.O. Incoming Call
Y=25 Tie Line Incoming Call
00-63: Tenant No.
0 : Split Call Forwarding
1 : Call Forwarding
Assign the destination of Split Call For-
warding.
NOTE
(1)
(2)
XX Y
XX: 00-63: Tenant No.
Y : 0-7: Block No.
X-XX + + YY···Y
X-XX : Trunk Access Code
(1-2 digits)
YY···Y: Called No. (Max. 26 digits)
X-XXXXXXXX: Station No. (1-8 digits)
CM78
END
CM65
B
,
Dial Destination No. X (0-9).
0: BLOCK No.0
1: 1
2: 2
3: 3
4: 4
5: 5
6: 6
7: BLOCK No.7
8: Destination for Call Forwarding-Busy Line/-
Don’t Answer
9: Destination for Speed Calling-station (BLOCK
No. 0)
+
Dial Access Code for Split Call
Forwarding-Busy Line/-Don’t An-
swer.
or
Depress Split Call Forwarding-
Busy Line/-Don’t Answer key.
Destination assigned
by CM78.
To Next Page
Loading...
