NEC NEAX 2000 - Authorization Code

AUTHORIZATION CODE
– 49 –
A2042-10
AUTHORIZATION CODE
PROGRAMMING
There are two kinds of processor for Authorization Code. One is MP card, the other is AP01 card.
For MP card, EXPMEM card can be used to expand the number of codes.
(1) With MP card
DESCRIPTION DATA
Designate the processor for this feature as
MP card.
(1)
(2)
216: Processor for Authorization Code
0: MP card
Specify whether Service Set Tone is pro-
vided after dialing the access code for Au-
thorization Code.
(1)
(2)
362: Service Set Tone after dialing the
access code
0 : No tone
1 : Service Set Tone
Assign the Service Restriction Class A for
Authorization Code to the required sta-
tions.
•
(1)
(2)
Y=02
X-XXXXXXXX: My Line No.
XX ZZ
XX: 00-15 : Service Restriction Class
A
Allow Authorization Code in the Service
Restriction Class A assigned by CM12
Y=02.
•
(1)
(2)
Y=31 Authorization Code
00-15: Service Restriction Class A
assigned by CM12 Y=02
1 : Allow
Assign the access code for Authorization
Code.
•
(1)
(2)
Y=0-3 Numbering Plan Group 0-3
X-XXXX: Access Code
A086: Authorization Code
Specify the maximum number of digits for
Authorization Code.
(1)
(2)
11
01-16 : 1 digit-16 digits
NONE : 16 digits
CM12
CM15
CM20
START
CM08
CM42
A