NEC NEAX 2000 Programming Manual

COMMON ROUTE INDIAL
– 154 –
A2148-10
COMMON ROUTE INDIAL
PROGRAMMING
DESCRIPTION DATA
Provide the system with Diversion Display. (1)
(2)
204
0: Available
Assign the required number of LDN or TIE
keys on the ATTCON/DESKCON.
•
(1)
(2)
Y=00
ATTCON No. (E000-E007) + + Key
No.
F6000-F6007: LDN0-7
F6040-F6047: TIE0-7
Assign the indialed number to each LDN
or TIE key assigned by CM90.
The indialed number should be different
from any numbers assigned by CM10 and
CM11.
•
(1)
(2)
•
(1)
(2)
Y=01 To LDN keys
1-8: LDN key 0-7 assigned by CM90
X-XXXX: Indialed No.
Y=02 To TIE keys
1-8: TIE key 0-7 assigned by CM90
X-XXXX: Indialed No.
Assign the destination of a DID/Tie Line
call transferred when unassigned number
is dialed.
•
•
(1)
(2)
Y=06 For DID Call
Y=07 For Tie Line Call
00-63: Tenant No.
X-XXXXXXXX: Station No.
E000: ATTCON/DESKCON
CM90
CM50
CM51
START
END
CM08
,

NEC NEAX 2000 Specifications

General

Brand	NEC
Model	NEAX 2000
Category	Server
Language	English