NEC NEAX 2000 - Day;Night Class of Service

DAY/NIGHT CLASS OF SERVICE
– 172 –
A2168-10
DAY/NIGHT CLASS OF SERVICE
PROGRAMMING
For each class of service assignment, refer to CLASS OF SERVICE-INDIVIDUAL.
page 149
NOTE: The following trunk data (CM30) can be changed by this feature (depending upon pro-
gramming).
Day (Y)
Night (Y)
02 03
04 05
13 14
15 16
30 31
DESCRIPTION DATA
Assign the password code for Day/Night
Change by ATTCON.
•
(1)
(2)
Y=30
1
XX-XX: Password Code (Max. 8 digits)
X: 0-9, A(*), B(#)
If no data is set, the default setting is
NONE. In this case, the password is set
to “12345678.”
Assign the Day/Night Mode key on
ATTCON.
•
(1)
(2)
Y=00
ATTCON No. + + key No.
F6110
Assign the access code for providing Day/
Night Mode change from a ATTCON, if re-
quired.
•
(1)
(2)
Y=0-3 Numbering Plan Group 0-3
X-XXXX: Access Code
A155
START
CM60
END
CM20
CM90
,