NEC NEAX 2000 - Attendant Camp-On with Tone Indication

ATTENDANT CAMP-ON WITH TONE INDICATION
– 32 –
A2032-10
ATTENDANT CAMP-ON WITH TONE INDICATION
PROGRAMMING
To reenter a Camped-On trunk from an Attendant before Automatic Recall:
DESCRIPTION DATA
Specify the Camp-On Tone sent to busy
station.
(1)
(2)
068
0 : Camp on Tone is sent out only
once.
1 : Camp on Tone is repeated at an
interval of 4 sec.
Specify the recall timing of Camp-On. •
(1)
(2)
Y=0
00
01-14: 2.4 sec.-33.6 sec.
(2.4 sec. increments)
15-24: 38.4 sec.-124.8 sec.
(9.6 sec. increments)
If no data is set, the default setting is 31.2-
33.6 sec.
DESCRIPTION DATA
Assign the access code for Call Pickup-
Direct.
•
(1)
(2)
Y=0-3 Numbering Plan Group 0-3
X-XXXX: Access Code
A021: Call Pickup-Direct
CM41
START
END
CM08
START
CM20
END