NEC NEAX 2000 - Last Number Call; Last Number Call-Attendant; LAST NUMBER CALL-D Term

LAST NUMBER CALL
LAST NUMBER CALL-ATTENDANT
LAST NUMBER CALL-D
term
– 285 –
A2280-10
LAST NUMBER CALL
LAST NUMBER CALL-ATTENDANT
LAST NUMBER CALL-D
term
PROGRAMMING
HARDWARE REQUIRED
D
term
and DLC card if required
DESCRIPTION DATA
Provide the system with Last Number Call. (1)
(2)
177
0: Available
Specify the capability for internal calls with
this feature.
If the data for CM08>178 is set to “0”, this
feature will be only applied to outgoing
calls.
(1)
(2)
178
0 : Not available
1 : Available
Assign the access code for Last Number
Call.
•
(1)
(2)
Y=0-3 Numbering Plan Group 0-3
X-XXXX: Access Code
A069
Assign the Last Number Call feature ac-
cess key onto each D
term
.
•
(1)
(2)
Y=00
My Line No. + + Key No.
F0069: Last Number Call
Assign the Last Number Call/Stack Dial
key to each ATTCON/DESKCON.
•
(1)
(2)
Y=00
ATTCON No. (E000-E007) + + Key
No.
F6121: Last Number Call/Stack Dial
CM20
START
END
CM08
CM90
,
,