INTRODUCTION
REFERENCE MANUAL
– 2 –
A2001-10
APPENDIX D FEATURES AND SPECIFICATIONS
This appendix contains the following Features and Specifications which explains each service
feature, operating procedure, and service conditions.
• BUSINESS FEATURES AND SPECIFICATIONS
• HOSPITALITY FEATURES AND SPECIFICATIONS
• FEATURES FOR AUSTRALIA FEATURES AND SPECIFICATIONS
• FEATURES FOR OTHER COUNTRIES FEATURES AND SPECIFICATIONS
REFERENCE MANUAL
For detail description of each command, refer to the Command Manual.
For the features which are not mentioned in this manual, refer to the individual manuals listed
below.
Command Manual:
describes Customer Administration Terminal (CAT) operation, command function and setting
data required for programming the system, and Resident System Program.
AD-8 System Manual:
describes the hardware installation procedure and programming procedure for AD-8 System.
CCIS System Manual:
describes the system description, hardware installation procedure, programming procedure and
operation test procedure for CCIS System.
Data Interface System Manual:
describes the system description, hardware installation procedure, programming procedure and
operation test procedure for Data Interface System.
ISDN System Manual:
describes the system description, hardware installation procedure, programming procedure and
operation test procedure for ISDN System.
Maintenance Manual:
describes the maintenance service features and the recommended troubleshooting procedure.
OAI System Manual:
describes the system description, hardware installation procedure, programming procedure and
troubleshooting procedure for OAI (Open Application Interface).
To Next Page
Loading...
Need help?
General