ATTENDANT DELAY ANNOUNCEMENT
– 35 –
A2032-10
ATTENDANT DELAY ANNOUNCEMENT
PROGRAMMING
DESCRIPTION DATA
Assign a Digital Announcement Trunk card
number to the required LEN.
NOTE: The Digital Announcement Trunk
card number must be assigned
to the first LEN (Level 0), the
third LEN (Level 2), the fifth LEN
(Level 4) and the seventh LEN
(Level 6) of each LT slot.
(1)
(2)
000-763: LEN
EB002-EB127: Digital Announcement
Trunk Card No.
For PIM0/1: EB002-EB031
For PIM2/3: EB032-EB063
For PIM4/5: EB064-EB095
For PIM6/7: EB096-EB127
NOTE: EB000 and EB001 are dedi-
cated to built-in Digital An-
nouncement Trunk of the MP
card.
Allow the Announcement Service via Digi-
tal Announcement Trunk on Attendant De-
lay Announcement.
•
(1)
(2)
Y=74
00-63: Trunk Route No.
0: Allow
Assign the function of the Digital An-
nouncement Trunk card.
•
(1)
(2)
Y=00
000-001: Built-in DAT on MP card
002-127: Digital Announcement Trunk
Card No. (EB002-EB127) as-
signed by CM10
0FXX : Attendant Delay Announcement
XX: 00-63: Message No.
•
(1)
(2)
Y=0A
00-63: Tenant No. of Trunk assigned by
CM30 Y=01
00-63: Message No. assigned by
CM49 Y=00
Specify the replay timer of the message
recorded in the Digital Announcement
Trunk.
(1)
(2)
165
0 : Replay at an interval assigned by
CM41 Y=0>47
1 : Replay only once
CM35
CM49
CM08
START
CM10
A
To Next Page
Loading...
Need help?
General