TRUNK LINE APPEARANCE-D
term
– 538 –
A2536-10
To provide enhanced Trunk Line Appearance:
NOTE: If the incoming call is routed via the Internal Automated Attendant feature (DAT card),
the tenant number programmed in CM49 Y=01 must match the tenant number pro-
grammed in CM20 Y=01 for the incoming trunk.
DESCRIPTION DATA
Program enhanced Hold key to each
D
term
.
•
(1)
(2)
Y=00
My Line No. + + Key No.
F0058: Hold Key
Program Trunk Answer key. (1)
(2)
My Line No. + + Key No.
F0059: Trunk Answer Key
Assign Trunk Answer to be used for
analog telephones.
•
(1)
(2)
Y=0-3 Numbering Plan Group 0-3
X-XXXX: Access Code
A059: Trunk Answer
Assign Trunk Hold to be used for
analog telephones.
(1)
(2)
X-XXXX: Access Code
A058: Trunk Hold
Assign ID code for each C.O. trunk. •
(1)
(2)
Y=19
000-255: Trunk No.
ABCD: Trunk ID code
Assign Answer preference. (1)
(2)
114
0 : Answer by 2-digit Trunk ID code
[Answer Code + Trunk ID Code
(CD)]
1 : Answer by 4-digit Trunk ID code
[Answer Code + Trunk ID Code
(ABCD)]
Assign Hold Recall to alternate destina-
tion.
•
(1)
(2)
Y=21
00-63: Tenant No.
X-XXXXXXXX: Station No.
CM30
CM51
START
END
CM90
CM20
CM08
,
,