SPEED CALLING-ONE TOUCH-D
term
– 444 –
A2437-10
DESCRIPTION DATA
Allocate the memory area for Speed Call-
ing-One Touch-D
term
to each station.
The memory block for storing one called
number of Speed Calling-One Touch-D
term
is called a “Memory Parcel”.
An assembly of 10 Memory Parcels is
called a “10-Slot Memory Block,” and one
hundred 10-Slot Memory Blocks are
called a “1000-Slot Memory Block”.
(1)
(2)
X-XXXXXXXX: My Line No.
W XX 0 ZZ
W : 0-3 (Basic), 4-9 (Option): 1000-
Slot Memory Block No.
XX: 00-99: Memory Slot Block No.
(10-Slot Memory Block)
ZZ: 01/02: Number of 10-Slot Memory
Blocks (10 memories/20 memo-
ries)
NOTE 1: Speed Calling-Station by dial access and by D
term
One Touch keys uses the com-
mon memory area. Be sure to allocate the difference memory area by CM94 from
the memory area set by CM73.
NOTE 2: 1000-Slot Memory Block number 4-9 can be used when the Expansion Memory
card (PZ-M537) is mounted on the MP card.
If the station is assigned to One Touch keys using this memory area, the lamp does
not show the busy state.
END
CM94
A
0
3
4
1000-Slot
Memory Block
0
9
1
Memory Parcel
00
99
01
10-Slot
Memory Block
Basic 4000 Memory Parcels
~
9
Option 6000 Memory Parcels
To Next Page
Loading...
