DAY/NIGHT MODE CHANGE BY STATION DIALLING
– 174 –
A2168-10
NOTE: The following trunk data (CM30) can be changed by this feature (depending on pro-
gramming).
Day (Y) Night (Y) Mode A (Y) Mode B (Y)
02 03 40 41
04 05 42 43
13 14
15 16
30 31
DESCRIPTION DATA
Allow Day/Night Mode Change by Station
Dialing in the Service Restriction Class B
assigned by CM12 Y=02.
•
(1)
(2)
Y=60
00-15: Service Restriction Class B as-
signed by CM12 Y=02
1 : Allow
Assign the access code for Day/Night
Mode Change by Station Dialing.
•
(1)
(2)
Y=0-3
Numbering Plan Group 0-3
X-XXXX: Access Code
A043: Day/Night Mode Change by Sta-
tion Dialing
Assign the Day/Night Mode Change by
Tenant key on D
term
, if required.
•
(1)
(2)
Y=00
My Line No. + + Key No.
F1300-F1363: Day/Night Mode
Change by Tenant 00-
63
To the key which is set by CM90
Y=00>F13XX, specify the call indicator
lamp control as “not available”.
•
(1)
(2)
Y=05
My Line No. + + Key No.
0 : Not available
1 : Available (The lamp lights on call
termination or recall.)
Assign the Day/Night Mode Change by
Tenant key on the DSS Console, if re-
quired.
(1)
(2)
DSS Console No. (00-31) + + DSS
Key No. (00-59)
F1300-F1363: Day/Night Mode
Change by Tenant 00-
63
END
CM15
A
CM97
CM20
CM90
,
,
,
To Next Page
Loading...
