NEC NEAX 2000 - Page 120

CALL INFORMATION SYSTEM (CIS)
D
term
TIMS TERMINAL
– 100 –
A2097-10
D
term
TIMS TERMINAL
A D
term
assigned the TIMS function buttons is called the D
term
TIMS. Following figure shows the
typical key arrangement of the D
term
TIMS.
The accumulated billing data can be printed by the D
term
TIMS operations, and further, hotel fea-
tures available.
The Table below shows the TIMS Billing data print operation by the D
term
TIMS.
D
term
TIMS Operation
Continued on next page
ACTION TARGET PRINT TYPE OPERATION OF FUNCTION KEY
Print Specified
station
Totaled
Bill
Interim PRINT + REC + Station No. + SET
Audit PRINT + REC + Station No. + RESET
Call
Record
Interim PRINT + REC + DETAIL + Station No. + SET
Audit PRINT + REC + DETAIL + Station No. + RESET
Specified
station
group
Totaled
Bill
Interim PRINT + REC + GROUP + Group No. + SET
Audit PRINT + REC + GROUP + Group No. + RESET
Call
Record
Interim PRINT + REC + DETAIL + GROUP + Group No.+
SET
Audit PRINT + REC + DETAIL + GROUP + Group No.+
RESET
Display Specified
station
Totaled
Bill
Interim REC + Station No. + SET
Audit REC + Station No. + RESET
NOTE 1
Call
Record
Interim REC + DETAIL + Station No. + SET
Audit REC + DETAIL + Station No. + RESET NOTE 1
Extra
charge
input
Specified
station
Both Totaled Bill
and Call Record
REC + Station No. + REC + Extra charge + SET
Check-In Specified
station
NOTE 2 CK-IN + Station No. + SET
Check-
Out
Specified
station
NOTE 2 CK-IN + Station No. + RESET