NEC NEAX 2000 - Page 141

CALL INFORMATION SYSTEM (CIS)
PROGRAMMING
TIMS Printer Programming
– 121 –
A2107-10
DESCRIPTION DATA
Specify whether print queuing is provided
by the printout operation during the printer
is in busy, off-line or short of paper.
(1)
(2)
66
0 : Not provided
(Error indication)
1 : To provide
Specify whether the restriction of outgoing
call is set during printout operation of total
call charge/call record on a Small Group or
Medium Group.
(1)
(2)
99
0 : Not set
1 : To set
Specify whether the printout of totaled bill/
call record starts a new page for each
Small Group.
(1)
(2)
100
0 : No
1 : Yes
Specify whether the printout of totaled bill/
call record starts a new page for each Me-
dium Group.
(1)
(2)
101
0 : No
1 : Yes
Specify whether the printout of totaled bill/
call record starts a new page for each
Large Group.
(1)
(2)
102
0 : No
1 : Yes
Specify whether the call records which
have been printed out are confirmed by In-
terim Printout on station basis.
(1)
(2)
121
0 : Not available
1 : Available
Specify whether the call records which
have been printed out are confirmed by In-
terim Printout on group basis.
(1)
(2)
122
0 : Not available
1 : Available
Specify whether only the call records
which have been printed out are cleared.
NOTE 1: This data setting is effective
when CMD000>16: 1 or
CMD000>128: 1.
NOTE 2: When CMD000>123: 1 is set,
CMD000>121 and 122 must be
set to 1.
(1)
(2)
123
0 : Not available
1 : Available
CMD000
C
B