CONSECUTIVE SPEED CALLING
– 158 –
A2157-10
DESCRIPTION DATA
Allocate the memory area for Speed Call-
ing-Station to each station when using
Consecutive Speed Calling.
(1)
(2)
X-XXXXXXXX: Station No.
W XX Y ZZ
W : 0-3 (Basic), 4-9 (Option): 1000-Slot
Memory Block No.
NOTE
XX: 00-99: Memory Start Block No.
(10-Slot Memory Block)
Y : Facility for programming the dialed
number from the Station
0/1: Effective/Ineffective
ZZ: 01-10: Number of 10-Slot Memory
Blocks
NOTE: 1000-Slot Memory Block number 4-9 (6000 Memory Parcels) can be used when
the Expansion Memory card (PZ-M537) is mounted on the MP card.
For using this memory area, there are several conditions as mentioned below:
• This memory area cannot be used for Speed Calling with Speed Calling keys
provided by CM90: F11XX on a D
term
, and cannot also be used for Speed Call-
ing-System.
• When exchanging an Expansion Memory card for another, data setting for this
memory area must be reentered.
• The Office Data in this memory area can be saved and loaded by MAT opera-
tions.
CM73
A
B
To Next Page
Loading...
