NEC NEAX 2000 - Page 181

CONSECUTIVE SPEED CALLING
– 161 –
A2157-10
DESCRIPTION DATA
Set the number to be dialed to each Mem-
ory Slot number, if required.
The numbers to be called are usually set
from individual station user.
•
(1)
(2)
Y=0
X YY Z
X : 0-3 (Basic), 4-9 (Option):
1000-slot Memory Block No.
YY: 00-99: 10-Slot Memory Block No.
Z : 0-9: Memory Parcel No.
Stored No.:
Outgoing Call Access Code (Max. 4
digits) + + Stored No. (Max. 26 dig-
its)
To set a pause into the Stored No.,enter
“C” (Fixed Pause=1.5 sec) or “D”
(Programmable Pause specified by
CM41 Y=0>38) after desired digits.
Assign the Station Name to be displayed
to each Memory Slot number, by character
codes or character.
•
(1)
(2)
Y=1
X YY Z
X : 0-3 (Basic), 4-9 (Option):
1000-Slot Memory Block No.
YY: 00-99: 10-Slot Memory Block No.
Z : 0-9: Memory Parcel No.
XX...XX: Station Name Character
Code
(Max.32 digits, 16 characters)
See APPENDIX B: CHARACTER
CODE TABLE.
•
(1)
(2)
Y=2
X YY Z:
X : 0-3 (Basic), 4-9 (Option):
1000-Slot Memory Block No.
YY: 00-99: 10-Slot Memory Block No.
Z : 0-9: Memory Parcel No.
XX...XX: Station Name Character by
MAT/CAT
(Max.16 characters)
D
CM74
E
,