NEC NEAX 2000 - Page 187

CONSECUTIVE SPEED CALLING
– 167 –
A2157-10
HARDWARE REQUIRED
D
term
and DLC card if required
DESCRIPTION DATA
Set the stored number to Memory Slot
number allocated by CM71, as needed.
•
(1)
(2)
Y=0
000-299: Memory Slot No.
Stored No.:
Outgoing Access Code (Max. 4 digits)
+ + Stored No. (Max. 26 digits)
To set a pause into the Stored No., en-
ter “C” (Fixed pause=1.5 sec) or “D”
(Programmable pause specified by
CM41 Y=0>38) after desired digits.
Assign the name for display, to the Memo-
ry Slot number allocated by CM71, by
character codes or character.
•
(1)
(2)
Y=1
000-299: Memory Slot No.
XX...XX: Station Name Character
Code
(Max. 32 digits, 16 characters)
See APPENDIX B: CHARACTER
CODE TABLE.
•
(1)
(2)
Y=2
000-299: Memory Slot No.
XX...XX: Station Name Character by
MAT/CAT
(Max. 16 characters)
Specify the Speed Calling-System securi-
ty. (Stored number displays on D
term
for an
outgoing call by Speed Calling-System.)
(1)
(2)
043
0 : Not displayed
1 : To display
Specify the Toll Restriction for an outgoing
call by Speed Calling-System.
(1)
(2)
044
0 : Not provided
1 : To provide
CM08
END
CM72
A
,